Building A Dresser From Plywood

I’ve laid out the cuts on 3 sheets of plywood (all the cuts, actually, in a sketchup file) and there isn’t much cutting waste. Build the bottom from 1/2” plywood.

How to build a dresser Diy dresser build, Diy dresser

Build the three drawers as.

Building a dresser from plywood. Finishing up, it was time to make some legs for the dresser. The legs are just made from two pieces of 2x4 glued together, and cut to size. Attach the 1x2 rails and drawer dividers between the two sides to build the carcass of the dresser.

I used a table saw to rip my plywood, but you can also use a circular saw with a straight edge. How to layout the wood drawer slides for the sideboard. However, not all wood species are available in veneer plywood.

You can find these materials in many different types of hardwood so that one or both of the outer veneers can match your drawer boxes and/or fronts. Plywood for most drawers is 1/4 inch thick but can be 1/2 inch thick on large drawers. Diy dresser plans diy furniture plans small furniture woodworking furniture plywood furniture furniture projects wood projects woodworking projects furniture buyers.

When the glue is good and dry, you'll cut two side pieces and a back piece. Add glue to the joints and secure the components together by using 1 1/4′ screws. I used pocket holes to join the drawer sides to the front and back and for the bottom, i used 1/4″ plywood fitted.

Drill pocket holes at both ends of the components, as well as well along the sides of the plywood panel. Once the plywood is cut, the chair is assembled using glue and a mallet. After building out the frame and the dresser top, i moved to the drawer construction.

I've got a tip for gluing wood panels together when you're in a hurry. Easy wood projects furniture projects wood furniture cheap furniture luxury furniture diy drawers wooden drawers wood drawer slides armoires diy. Build the bottom of the dresser by using 1×2 lumber and 3/4″ plywood.

Since there was 1 1/2 sheets of plywood from the plan i decided to cut the 1×2’s, 1×3’s and all the drawer boxes from plywood as well and did away with the boards. As you can see in the image, in order to build the large drawers, placed at the bottom of the dresser, you need to use 1×6 lumber. I chose to make the 3 dresser drawers out of 1/2″ plywood which to me made the drawers feel slightly more spacious and also to be less heavy.

Use a measuring tape to check opposite corners to ensure the box is square. If the top is just screwed to the carcass, the wood will split. Instead, the builder used just a single piece of plywood and a cnc machine.

Build bottom using plywood and 1x2 and attach to both the sides. Place the plywood backing onto the back rails between the legs. Fit the 1×8 face of the drawer with glue and drive in 1 1/4” nails from inside.

This can be accomplished with large holes, or better yet, elongated slots. Get nice and grainy looking plywood for the outside pieces if you're going to stain it. First, i cut my plywood side panels to size and drilled 3/4″ pocket holes facing up, down, and towards the front.

Continued from building a dresser making the legs. I joined the front legs to the back legs with a piece of 1.5 x 1.5, to give them a bit more rigidity. Do the side pieces first and then measure your back piece.

The holes in the dresser carcass must be large enough to allow for this expansion/contraction. Use pocket hole screws to lock the components together. Learn how to build a modern dresser that's small in size but big in storage from inexpensive plywood and wood dowels following this easy video tutorial.

Wood does not expand /contract significantly along it’s length. The sides, back and drawers.

How to make custom plywood shelves DIY Woodwork